System Operations 6-4 System Menu
MS20xxC UG PN: 10580-00305 Rev. J 6-5
System Options Menu
Key Sequence: Shift, System (8)>System Options
Date & Time: Press this submenu key to display a dialog box for setting the
current date and time. Use the submenu keys or the Left/Right arrow keys to
select the field to be modified. Use the keypad, the Up/Down arrow keys, or
the rotary knob to select the date and time. Press Enter to accept the
changes, or press the Esc key to return to normal operation without changing
anything.
Ethernet Config: Press this submenu key to display the Ethernet submenu
and to open the Ethernet Editor dialog box to set the IP address of the
instrument. For details, refer to section “Ethernet Configuration” on page G-1
in Appendix G, “More About DHCP”.
Language: Press this submenu key to open a list box and select a built-in
language for the VNA Master displays. The languages that are currently
available are: English, French, German, Spanish, Japanese, Chinese,
Korean, Italian, and Russian. In addition, a custom language may be selected
if it has been defined by using Master Software Tools and loaded into the
VNA Master. The custom language may be loaded into the instrument via
Master Software Tools. If a mode does not have language translations
available, then English is the default language. Press Enter to accept the
change, or press the Esc key to return to normal operation without changes.
In addition, any existing language (except English) may be edited for a better
local translation.
Caution: A Factory Default reset (Esc + On) or Master reset (8 + On) will
overwrite any custom settings within the VNA Master and will require that you
reload a custom language file via Master Software Tools.
Display: The Display submenu key opens the “Display Settings Menu”
on page 6-10 allowing brightness control and the selection of the default color
display, black & white display, night vision display, or a high contrast display.
Name: Press this submenu key to open a dialog box to name the instrument.
The VNA Master can be named by using the text entry controls as described
in section “Text Entry” on page 2-15. Press Enter to save the name.
Volume: Press this submenu key to set the speaker volume. The current
volume setting is displayed on the screen. Use the keypad, the Up/Down
arrow keys, or the rotary knob to change the volume, and press the Enter key
to accept the change.
Reset: Press this submenu key to open the “Reset Menu” on page 6-11.
More: Press this submenu key to open the “System Options 2/2 Menu”
on page 6-6.
Figure 6-4. System Options Menu
More
Reset
System Options
Date
&
Time
Ethernet
Config
Language
Name
Volume
Display
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
Need help?
General
