37
4.5.1 Basic parameter setting
Click [Basic parameter setting] item, pop-up [Basic parameter setting] window
as following:
Com port Communication delay time (1-5) sec.: The default time is 3s.
Network Communication delay time (1-20) sec.: The default time is 5s.
□ Communication failed, automatically exit current operation: If timeout is
larger than ‘Communication delay time’, software will automatically exit.
□ In Real-time Monitoring, voice prompts “Department name”: During real-time
monitor, if employee is access granted, the software will voice prompt employee
department and name.
□ Clear the data after downloading: After downloading records completed,
delete the record downloaded from machine automatically.
Choose parameter bases on practical situation, click [OK] button to save the
setting of parameter; Click [Cancel] button to cancel the setting.
4.5.2 T&A Status setting
Click the [T&A Status setting] option, and the [T&A status setting] window pops
up:
To Next Page
Loading...
Need help?
General
