81
database regularly. Click [Backup Database] in [Data Maintenance] menu, then
select the route to back up the database. Click [Save] when ready.
Back up the database manually: Copy the Att2003.mdb from the installation
directory to the route you want to back up the database, so if the system collapses,
you just copy Att2003.mdb to installation directory over again after re-installation.
5.6.6 Initialize System
Click [Initialize System] in [Data Maintenance] to initialize the system. (Note:
After the system is initialized, all information will be lost; the system will get back to
the state when just installed. Please make sure that you want to initialize the
system. )
5.7 External Program Management
Click [Device Management] on the main menu, following springs:
5.7.1 Connect to Communication management software
Click [Device Management]-[Connect to Time Attendance Machine], the
system will prompt the communication interface between the software and the time
attendance machine, control the current machine which connected with the
computer, also can collect the records from the machine, upload and download
employee information and fingerprint templates, or clear the old data on the
attendance machine, modify the time on the machine. More details please reference
the[Communication]chapter.
To Next Page
Loading...
Need help?
General
