Anyview A8 - Page 288

Patient monitor User’s manual
49
Alarm messages
Cause
Level
No cable
No cable connected
Low
Replace cable
Cable life expired;
Cable is defective
Incompatible cable
Cable is incompatible
Unrecognized cable
Cable is unrecognized
No sensor
No sensor connected
Replace sensor
Sensor life expired;
Sensor is defective
Invalid sensor
Sensor is incompatible;
Sensor is unrecognized
No tape
No tape
Replace tape
Tape life expired
Tape is defective
Invalid tape
Tape is incompatible;
Tape is unrecognized
Sensor Calibrating
Sensor is calibrating
Sensor off
Sensor may be disconnected from
patient
Pulse search
Searching pulse
No alarm
Interference
Interference detected
Low perfusion
Low perfusion index
Check sensor
Check sensor is connecting
Low SpO2 Signal IQ
SpO2 Signal IQ is low
Low PR SIQ
PR Signal IQ is low
Low PI confidence
PI confidence is low
Low SpCO SIQ
SpCO Signal IQ is low
Low SpMet SIQ
SpMet Signal IQ is low
Low SpHb SIQ
SpHb Signal IQ is low
Low Desat index SIQ
Desat index Signal IQ is low
Low SpOC SIQ
SpOC Signal IQ is low
Low PVI SIQ
PVI Signal IQ is low
 Temp
Physiological alarm:
Alarm messages
Cause
Level
〈
Temp label
〉
high
〈
Temp label
〉
measuring value is
above high alarm limit
Medium
User-Selectable
〈
Temp label
〉
low
〈
Temp label
〉
measuring value is
below low alarm limit
Technical alarm: