Anyview A8 - Page 294

Patient monitor User’s manual
55
Alarm messages
Cause
Level
ICG C.I. High
Parameter over high limit
Medium
User-Selectable
ICG TFC High
ICG C.I. Low
Parameter over low limit
ICG TFC Low
Technical alarm:
Alarm messages
Cause
Level
ICG Check cable
ICG cable is not connected
No Alarm
ICG Electrodes off
ICG electrode may be detached
from the patient or monitor
 C.O.
Physiological alarm:
Alarm messages
Cause
Level
C.O. TI Over High Range
Abnormal vital signs
High
User-Selectable
C.O. TB Over High Range
C.O. TI Below Low Range
C.O. TB Below Low Range
C.O. TB High
Parameter over high limit
Medium
User-Selectable
C.O. TB Low
Parameter over low limit
Technical alarm:
Alarm messages
Cause
Level
C.O. TI sensor off
The C.O. probe sheds off the
monitor.
Low
C.O. TB sensor off
Low
C.O. TI Self-test faulure
The hardware error.
Low
C.O. TB Self-test faulure
Low
C.O. Measure Time Out
Injection is not performed over 30
sec during manual measuring.
Low
C.O. Range Exceeded
Parameter exceeds the range.
Medium
 CSM