ANZ POS MOVE - Page 54

54
9
The terminal will associate with the base and display ‘Association
Successful’ when completed
10
The Bluetooth icon on the screen will become green to indicate
successful pairing
Configuring Communications Mode
1
Press the FUNC key
2
Key in 6 and press ENTER
3
Your ANZ POS Move terminal has a SIM card in the back (either Optus or
Telstra). If you are unsure what SIM card is in the terminal you can check
by looking at the top left corner of the terminal to see if it displays Optus
or Telstra. Note: The terminal needs to be powered on
4
Press the F2 touchscreen button to scroll to Optus or Telstra (as identified
in the above step) and press ENTER
Configuring Terminal ID
1
Press the FUNC key
2
Key in 3 and press ENTER
3
Type in Access Code 0240 and press ENTER
4
Type in your 11 digit Terminal ID and press ENTER