Apollo Thunderbolt Software Manual Console Settings 144
Devices Column
This column lists all Apollo devices in the system. It has
four primary functions:
1. Selects current unit to see device-specific options
2. Designates the monitor unit in multi-unit setups
3. Indicates which unit(s) are currently online
4. Adds devices for offline configuration
Select Device
Clicking a unit in the column reveals its device-specific
settings in the Options Column.
Device Letter
Each unit in the Devices list is designated with a sequential letter. These letters are
used in the I/O Matrix Panel when multi-unit cascading to differentiate between Apollo
devices. The device letters cannot be modified.
Device Color
Each unit in the Devices list is color coded for enhanced identification. These colors
are used in the Meter Bridge and the I/O Matrix Panel when multi-unit cascading to
differentiate between devices. The device colors cannot be modified.
Designate Monitor Unit
In multi-unit configurations, the device at the top of the column is the designated
monitor (master) unit. The monitor unit indicated by a speaker icon between the device
letter and the device name. To change the monitor unit, drag a unit to the top of the
device column.
For related details, see Multi-Unit Cascading.
Note: This operation reconfigures the system. There may be a delay before the
operation is completed.
Add Device
Unit(s) can be manually added for offline configuration by
clicking the “+” switch (below the devices in the column) to
present the Add Device menu. Click a device in the menu to
add it to the Device Column.
Note: When a device is properly connected and powered, it
is automatically detected and added to the device list.
To Next Page
Loading...
Need help?
General
