Apollo Thunderbolt Software Manual Introduction 8
Apollo Software Features
Note: For a list of hardware features, see the Apollo Hardware Manuals.
Console Application
General:
• Enables Realtime UAD Processing on Apollo inputs with indiscernible latency
• Analog-style mixer for low-latency monitoring and tracking with UAD plug-ins
• Remote control of Apollo hardware features and functionality
• Console sessions can be saved/loaded for instant recall of any configuration
• Multiple Undo/Redo for edit operations
Realtime UAD Processing:
• Up to four UAD plug-ins can be serially chained on each input and aux return
• UAD insert processing can be monitored while recording wet or dry
• Sub-2ms round-trip latency with four serial UAD plug-ins at 96 kHz sample rate
Channel Inputs:
• Input channels for all interface hardware inputs (except MADI with Apollo 16)
• Level, pan, solo, and mute controls on all inputs
• Four plug-in insert slots per input for Realtime UAD Processing
• Two stereo auxiliary sends with level and pan controls on all inputs
• Virtual inputs accept any outputs from DAW
• Stereo headphone sends with level and pan controls on all inputs*
• Up to four stereo cue mix sends with level and pan controls on all inputs*
• Adjacent input pairs can be linked for convenient stereo control
• Sample rate conversion is available on S/PDIF and AES/EBU inputs*
• Physical inputs can be routed to physical outputs (except Apollo Twin)
Monitoring:
• Stereo monitor mix bus with level, mute, solo, ALT, dim, and source select controls
• Up to four independent stereo cue mix buses
• Flexible routing matrix for assigning cues to any available headphone and line outputs
• Independent monophonic sum controls for all mix buses
• S/PDIF and AES/EBU outputs can optionally mirror the post-fader monitor mix*
• Dedicated Talkback microphone and monitor controller features*
(Apollo Twin MkII only)
Auxiliary Buses:
• Two stereo auxiliary sends/returns with independent level, mute, and mono sum controls
• Four plug-in inserts per auxiliary return for Realtime UAD Processing
• Auxiliary buses can be routed to main monitor mix and/or cue outputs
• Independent pre/post switching on each auxiliary bus
*Specific software features depend on hardware functionality not available with all Apollo models.
To Next Page
Loading...
Need help?
General
