Apollo Thunderbolt Software Manual Console Recall Plug-In 164
Console Recall Controls
Most Console Recall plug-in controls are duplicates of those found in the Console
application. The exceptions are the SYNC switch, and the CONSOLE switch, which opens
the Console application.
Console Recall plug-In controls
Monitor Controls
The exact same control descriptions in the Console application apply to the Console
Recall plug-in controls. Refer to the Console Reference chapter for descriptions of the
duplicated controls:
• Monitor Meters
• Monitor Level
• Monitor Output Options
Console Switch
The Console application can be opened by clicking the CONSOLE switch. Note that the
Console application does not need to be open when using the DAW with the Console
Recall plug-in; Console settings are always captured by the Console Recall plug-in as
long as the SYNC switch is engaged.
SYNC
Switch
Monitor
Meters
Monitor
Level
Monitor
Options
Open
Console
To Next Page
Loading...
Need help?
General
