Apollo Thunderbolt User Manual

Apollo Thunderbolt Software Manual Console Reference 105
Cue Outputs Popover
Note: For an overview of Apollo’s Cues, see Cues Overview.
The Cue Outputs popover window is where the cue bus returns are configured. To access
the Cue Outputs Popover, click the CUE OUTPUTS button in the Monitor Column.
Each cue bus has its own row of controls, as shown in the diagrams below. Because the
control set for each cue row is identical, each control in the rows are only described
once.
The Cue Outputs popover with Apollo Twin
The Cue Outputs popover with Apollo, Apollo 8, Apollo 8p
The Cue Outputs popover with Apollo 16
Close
Cue Output
Mono
Cue Source
Select
HP Settings
(entire row)
Line 3/4 Settings
(entire row)
Close
Cue Output
Mono
Cue Source
Select
Cue Output
Menu
Headphone
Output Select
CUE 1 Settings
(entire row)
CUE 2 Settings
(entire row)
Close
Cue Output
Mono
Cue Source
Select
Cue Output
Menu
CUE 1 Settings
(entire row)
CUE 2 Settings
(entire row)

Apollo Thunderbolt Specifications

General

Type	Audio Interface
Connectivity	Thunderbolt
Bit Depth	24-bit
DSP	UAD-2
Sample Rate	192 kHz
Thunderbolt Ports	2
DSP Processing	UAD-2
Software Included	UAD Software