Apollo Thunderbolt Software Manual Apollo Twin MkII Talkback 188
Talkback Input Strip
The talkback input channel strip is available in the Control
Room module within Console whenever Apollo Twin MkII is
connected.
To toggle visibility of the talkback strip, click the CTRL ROOM
button under Show Strips in the Monitor Column. Refer to the
illustration at right for element descriptions in this section.
Note: All talkback settings are global. Settings within the
talkback input strip are not saved within individual Console
sessions.
Talkback Channel Inserts
The talkback strip has four UAD plug-in inserts for Realtime
UAD Processing. All talkback plug-in inserts operate the same
way as other Console inputs, including the ability to save/recall
channel strip presets and switchable routing of channel insert
effects into the DAW.
For complete details on all insert functionality and operations,
see UAD Plug-In Inserts.
Talkback Sends Display
This area displays an overview of the talkback levels being sent
to each available cue mix bus.
To access the Talkback Sends Popover window, where individual
talkback send levels are adjusted, click the Talkback Sends
Display.
Note: See the Sends Overview for related information.
TALK Button
This button activates the talkback mic and the DIM function. Talkback is active when the
button is lit.
• Press and release the button quickly to latch talkback ON.
• To momentarily activate the function and deactivate when the button is released,
press for longer than 0.5 seconds.
Talkback
Channel
Inserts
Talkback
Sends
Display
TALK
Button
Talkback to Mix
Fader & Meter
Inserts Rec/Mon
Indicator
(click to switch)
Talkback input strip elements
To Next Page
Loading...
Need help?
General
