Apollo Thunderbolt Software Manual Unison 176
Matching Gain Stage Indicators
In Gain Stage Mode, Apollo’s preamp level indicator (the colored ring around the knob)
matches the colored dot on the target gain parameter in the Unison plug-in’s interface,
as shown below. The hardware and software controls are mirrored and the gain stage can
be adjusted using either control.
The color of Apollo’s preamp gain level indicator
changes to reflect the gain stage being controlled
The matching color dot on the parameter in the Unison plug-in interface indicates
which gain stage is being controlled by Apollo’s front panel preamp knob
Available Gain Stages
Unison plug-ins have up to three gain stage parameters. With Unison plug-ins that
contain two gain parameters, only the available gain parameters are cycled and
controlled in Gain Stage Mode.
Note: For details about the unique gain stage parameters available within
individual Unison plug-in titles, refer to the UAD Plug-Ins Manual.
To Next Page
Loading...
Need help?
General
