Apollo Thunderbolt Software Manual Apollo Twin MkII Talkback 194
Recording the Talkback Mic
To record the talkback mic signal on an audio track in a DAW:
1. Select TALKBACK as the I/O input source for the track(s):
• Mono tracks – Select TALKBACK 1 or TALKBACK 2 as the track input.
• Stereo tracks – Choose TALKBACK 1-2 as the track input.
2. Press the hardware or software TALK button to route the talkback mic signal to
the track. See Activating Talkback for related information.
3. Record the mic as you would any other audio signal using the DAW’s operating
procedures.
Talkback Recording Notes:
• The talkback mic is monophonic. Apollo Twin MkII’s TALKBACK 1 and TALKBACK
2 audio driver channels carry identical signals to facilitate DAWs that expect even
pairs of inputs.
• TALK must be active for the DAW track input to receive the talkback mic signal.
• Talkback can be activated and/or deactivated before, during, or after recording
(talkback and DAW operations are independent).
Selecting the talkback mic as a mono audio track’s input source in Pro Tools
To Next Page
Loading...
Need help?
General
