Apollo Thunderbolt Software Manual Console Reference 67
Current Bank
The Current Bank is all input channels that are currently displayed in the main body of
the Console window (below the Meter Bridge) as shown in the illustration below. The gray
Bank Bar is used to change the Current Bank.
Conceptual illustration of the Current Bank.
In this example, the Current Bank is analog channels 3 through 6.
Sliding the Bank Bar brings different channels into the Current Bank view.
Changing the Current Bank
Any of these methods can be used to change the channels within the Current Bank:
Click – Click anywhere within the Meter Bridge, but outside of the Bank Bar. The Bank
Bar jumps to the channel that is clicked in the Meter Bridge.
Drag – Click-hold-drag the gray Bank Bar to slide it across available channels.
Hover Scroll – Position the mouse over the Meter Bridge then scroll horizontally with the
computer’s input device.
Arrow keys – When the Bank Bar has keyboard focus, use the computer’s left/right arrow
keys to navigate the Current Bank.
Slide gray Bank Bar
to change Current Bank
Bank Bar
(gray)
Current Bank
(visible channels)
Channels not
within Bank Bar
Channels not
within Bank Bar
Meter
Bridge
To Next Page
Loading...
Need help?
General
