Apollo Thunderbolt Software Manual Console Reference 89
Sends Popover Window Descriptions
Input Name – The name of the Apollo input is displayed as the window’s title. If the
input name is customized in Console, the custom name is displayed here.
Previous/Next Channel – These buttons switch the window to display the sends of
adjacent channels. The “Command+Left/Right Arrow” keyboard shortcut can also be
used to navigate channels.
Tip: To prevent the window from moving when these buttons are used, drag the
Sends window to any location other than its default position.
Bus Name & Color – The bus name and its color are displayed above each send.
Tip: If a CUE bus color is gray, that cue’s SOURCE is set to MIX in the CUE
OUTPUTS popover.
Send Pan – Adjusts the input’s position in the stereo field of the send bus. The pan
knobs are not displayed when the input is in stereo linked mode, which forces the stereo
channels to automatically pan hard left/right.
Send Mute – The Mute button can be used to disable/re-enable the bus send. When the
send is active, the button is lit.
Send Level – This fader adjusts the input channel’s signal level sent to the bus.
Send Meter – The post-fader signal level of the Send is displayed here.
To Next Page
Loading...
Need help?
General
