Apollo Thunderbolt Software Manual Console Reference 99
Aux Return Strips
Both of Console’s aux return strips are identical. Most of the
controls have identical functionality as their equivalent control
in the channel input strips.
Refer to the diagram at right for descriptions in this section.
Aux Inserts
The aux inserts are operated using the same methods as the
insert controls in the channel input strips. See UAD Plug-In
Inserts for complete descriptions of the aux insert controls.
Important: UAD plug-in processing in the auxiliary inserts
is always routed to the DAW (if the aux buses are routed as
DAW inputs), regardless of the Insert Effects setting (aux
insert processing is always recorded).
Aux Cue Sends
The aux returns can be routed to any available cue mix buses
using the cue sends on the aux returns. There is no cue pan
control on the aux returns, because the aux returns are stereo.
The aux cue sends are operated using the same methods
as the send controls in the channel input strips. See for
complete descriptions of the aux send controls.
Note: When a Cue Source is set to cue, aux returns must
be sent to the cue mix bus via these controls for the aux to
be heard in the cue mix.
Aux Pre
When the PRE switch is engaged (lit), the aux mix bus is pre-
fader and pre-mute. In PRE mode, the channel faders and
mutes do not affect the aux bus.
Tip: Pre-fader mode is useful for configuring a mix bus that
is independent of the monitor mix controls (for example,
when creating a cue mix).
Aux Post
Post-fader is the default setting for Aux 1 and Aux 2. When the POST switch is engaged
(lit), the aux mix bus is post-fader and post-mute. In POST mode, the channel faders
must be up and un-muted to be routed to the aux bus, and the aux send levels will
reflect channel fader changes.
Tip: Post-fader mode is typically used when configuring an effect send mix so the
effect sends will interact with the main channel controls.
Aux
Inserts
Cue
Sends
Pre & Post
Switches
Level Fader
& Meter
Aux Name
& Color
Mono & Mute
Switches
The Aux Return Strip
To Next Page
Loading...
Need help?
General
