20
THE INFORMATION CONTAINED HEREIN IS PROPRIETARY TO APPLANIX CORPORATION. RELEASE TO THIRD PARTIES OF THIS PUBLICATION OR OF
INFORMATION CONTAINED HEREIN IS PROHIBITED WITHOUT THE PRIOR WRITTEN CONSENT OF APPLANIX CORPORATION. APPLANIX RESERVES THE
RIGHT TO CHANGE THE SPECIFICATIONS AND INFORMATION IN THIS DOCUMENT WITHOUT NOTICE. A RECORD OF THE CHANGES MADE TO THIS
DOCUMENT IS CONTAINED IN THE REVISION HISTORY SHEET. COPYRIGHT © APPLANIX CORPORATION, 2021ALL RIGHTS RESERVED. NO PART OF
THIS PUBLICATION MAY BE REPRODUCED, STORED IN A RETRIEVAL SYSTEM OR TRANSMITTED IN ANY FORM OR BY ANY MEANS WITHOUT THE
PRIOR WRITTEN CONSENT OF APPLANIX CORPORATION.
Figure 21: System Status- Identity
The Satellites menu offers a rich user interface for monitoring of the real time solution
status, current satellite coverage, position and attitude plots, as well as a direct interface
to Google Earth.
4.4. Data Logging
The raw data required for post-processing in POSPac UAV or POSPac MMS can be
logged to internal memory or to an external USB device. The external USB device needs
to be integrated by the user via the USB port (please refer to PUBS-MAN-005351 for
USB port configuration).
Data are logged to a proprietary file format with extension T04.
The user interface for Data Logging is shown on the Figure 22. Checking/Unchecking the
Enable box (marked with red circle on Figure 22) will automatically start/stop logging to
the selected media.
To Next Page
Loading...