42
THE INFORMATION CONTAINED HEREIN IS PROPRIETARY TO APPLANIX CORPORATION. RELEASE TO THIRD PARTIES OF THIS PUBLICATION OR OF
INFORMATION CONTAINED HEREIN IS PROHIBITED WITHOUT THE PRIOR WRITTEN CONSENT OF APPLANIX CORPORATION. APPLANIX RESERVES THE
RIGHT TO CHANGE THE SPECIFICATIONS AND INFORMATION IN THIS DOCUMENT WITHOUT NOTICE. A RECORD OF THE CHANGES MADE TO THIS
DOCUMENT IS CONTAINED IN THE REVISION HISTORY SHEET. COPYRIGHT © APPLANIX CORPORATION, 2021ALL RIGHTS RESERVED. NO PART OF
THIS PUBLICATION MAY BE REPRODUCED, STORED IN A RETRIEVAL SYSTEM OR TRANSMITTED IN ANY FORM OR BY ANY MEANS WITHOUT THE
PRIOR WRITTEN CONSENT OF APPLANIX CORPORATION.
Serial Port Setup to be compatible with the corrections source. There is no need to select
the correction type as LVX automatically detects the type of correction input.
Depending on the quality of incoming corrections the positioning mode should change to
more accurate such as DGPS or RTK. Please refer to Figure 40(Position Status) as
example that displays RTK mode and corresponding centimetres level error estimates.
Figure 40: Differential Solution Display
4.6.15. Ethernet Configuration:
By default the LVX product is preconfigured with a static IP address. The address can be
changed or reconfigured for DNS.
Figure 41 shows the Ethernet setup properties available under Network Configuration
menu.
To Next Page
Loading...