25
THE INFORMATION CONTAINED HEREIN IS PROPRIETARY TO APPLANIX CORPORATION. RELEASE TO THIRD PARTIES OF THIS PUBLICATION OR OF
INFORMATION CONTAINED HEREIN IS PROHIBITED WITHOUT THE PRIOR WRITTEN CONSENT OF APPLANIX CORPORATION. APPLANIX RESERVES THE
RIGHT TO CHANGE THE SPECIFICATIONS AND INFORMATION IN THIS DOCUMENT WITHOUT NOTICE. A RECORD OF THE CHANGES MADE TO THIS
DOCUMENT IS CONTAINED IN THE REVISION HISTORY SHEET. COPYRIGHT © APPLANIX CORPORATION, 2021ALL RIGHTS RESERVED. NO PART OF
THIS PUBLICATION MAY BE REPRODUCED, STORED IN A RETRIEVAL SYSTEM OR TRANSMITTED IN ANY FORM OR BY ANY MEANS WITHOUT THE
PRIOR WRITTEN CONSENT OF APPLANIX CORPORATION.
UTC yy.mm.dd hh:mm:ss ab
Where:
UTC is fixed text.
yy.mm.dd is the year, month, and date.
hh:mm:ss is the hour (on a 24-hour clock), minute, and second. Note: The time is
in UTC, not GPS time.
The letter a is an integer number representing the position-fix type:
1 = time solution only
2 = 1D position and time solution
3 = currently unused
4 = 2D position and time solution
5 = 3D position and time solution
The letter b is the number of GNSS satellites being tracked. If the receiver is
tracking 9 or more satellites, b will always be displayed as 9.
Each time tag is terminated by a carriage return, line feed sequence. A typical printout
looks like:
UTC 02.12.21 20:21:16 56
UTC 02.12.21 20:21:17 56
UTC 02.12.21 20:21:18 56
4.6. System Configuration
The Receiver Configuration menu includes the following configuration options as shown
in Figure 26.
To Next Page
Loading...