Applanix LVX - Figure 23: Logging Configuration

22
THE INFORMATION CONTAINED HEREIN IS PROPRIETARY TO APPLANIX CORPORATION. RELEASE TO THIRD PARTIES OF THIS PUBLICATION OR OF
INFORMATION CONTAINED HEREIN IS PROHIBITED WITHOUT THE PRIOR WRITTEN CONSENT OF APPLANIX CORPORATION. APPLANIX RESERVES THE
RIGHT TO CHANGE THE SPECIFICATIONS AND INFORMATION IN THIS DOCUMENT WITHOUT NOTICE. A RECORD OF THE CHANGES MADE TO THIS
DOCUMENT IS CONTAINED IN THE REVISION HISTORY SHEET. COPYRIGHT © APPLANIX CORPORATION, 2021ALL RIGHTS RESERVED. NO PART OF
THIS PUBLICATION MAY BE REPRODUCED, STORED IN A RETRIEVAL SYSTEM OR TRANSMITTED IN ANY FORM OR BY ANY MEANS WITHOUT THE
PRIOR WRITTEN CONSENT OF APPLANIX CORPORATION.
Figure 23: Logging Configuration
The Enable checkbox is used to manually start and stop logging, while the Auto Log
checkbox will automatically start logging data when the system is turned on and tracking
satellites.
The Schedule drop-down list allows the user to change the way in which the files are
logged:
 Always: data is logged in one single T04 file.
 Continuous: data is logged in many files of size Duration
 Manual: only one file is logged of size Duration, after which logging is
stopped.