DRAFT
September 25, 2007 1:07 am, 4376782_Standalone_Installation.fm
Chapter 4 Install the Standalone Layout
Set Up the Computer
Applied Biosystems StepOne
™
and StepOnePlus
™
Real-Time PCR Systems
Installation, Networking, and Maintenance Guide
56
Notes
4. Change the computer name:
a. In the desktop, right-click My Computer, then select Properties.
b. In the System Properties dialog box, select the Computer Name tab.
c. Click Change.
d. In the Computer Name field, enter the computer name.
Do not give the computer the same name as the instrument.
A shared name could lead to network conflicts if you install both devices to an
Ethernet network.
e. If necessary, define the Domain or Workgroup settings if you are going to
connect the computer to a network.
f. Click OK twice.
g. In the Network Identification dialog box, click OK.
Note: The computer name identifies the computer on the network and must be
different than that of the instrument. After you install the system, you can change
the computer name without disrupting the function of the StepOne
™
software.
5. In the Systems Settings Change dialog box, click Ye s to restart the computer.
6. Log onto the operating system as a member of the Administrators user group.
4c
4b
4g
4d
4f
4e
To Next Page
Loading...
Need help?
General
