DRAFT
September 25, 2007 1:07 am, 4376782_Standalone_Installation.fm
Chapter 4 Install the Standalone Layout
Analyze the RNase P Experiment
67
Applied Biosystems StepOne
™
and StepOnePlus
™
Real-Time PCR Systems
Installation, Networking, and Maintenance Guide
Notes
Transfer the Data
to the Computer
1. Connect the USB drive to one of the USB ports on the computer.
2. In the StepOne
™
software, select InstrumentInstrument Maintenance
Manager.
3. In the Instrument Maintenance Manager, click RNase P.
4. Select the RNase P Run:
a. In the RNase P Run screen, click Browse.
b. In the Open dialog box, navigate to the USB drive.
c. In the file name field, select the experiment.
d. Click Open.
The StepOne
™
software automatically analyzes the run and displays the results in
the RNase P Run screen.
4a
3
4d
4c
4b
To Next Page
Loading...
Need help?
General
