I. Aranet Pro connection to Local Network (LAN) with working DHCP server
II. Aranet PRO/Aranet PRO+ connection to PC
(1) Aranet PRO+: Plug in Ethernet cable connected to powered PoE enabled switch or
powered PoE insert “OUT” terminal; plug in another Ethernet cable to PoE insert “IN”
terminal and connect it to LAN Ethernet switch (router).
Wait until LED indicators “Power”, “System”, and “Ethernet” turn On.
Aranet PRO: Plug in Aranet PRO into power source using the AC power adapter and plug in
the Ethernet cable that connects Aranet PRO into local network (Router or Ethernet Switch)
Wait until LED indicators next to “12V” and “Wi-Fi” turn on and wait for another 30 seconds.
(2) Search for new IP-address assigned to Aranet PRO/Aranet PRO+ by DHCP server. You can
consult your local network administrator or scan your local network with any Network
scanner.
(3) Open internet browser and type in the URL bar discovered in the previous step IP address.
(4) You should now see the Aranet PRO/Aranet PRO+ login screen (refer to chapter 2.1.3 Initial
Login and Fast Settings of this manual).
(1) Aranet PRO+: Plug in Ethernet cable connected to powered PoE insert “OUT” terminal;
plug another Ethernet cable to PoE insert “IN” terminal and connect it directly to your PC.
Wait until LED indicators “Power”, “System”, and “Ethernet” turn On.
Aranet PRO: Plug in included AC power adapter jack and switch base on using On-Off
switch, plug in Ethernet cable that connects Aranet PRO directly to your PC. Switch Aranet
PRO on. Wait until LED indicators next to “12V” and “LAN” turn on and wait for another 30
seconds.
(2) Make sure the PC is not connected to any Wi-Fi Internet connections.
(3) For Windows 10, in the Control Panel menu navigate to Control Panel >Network and
Internet >Network and Sharing Center.
(4) Click “Change adapter settings”.
(5) Right-click on “Local Area Connection” and click on “Properties”.
(6) Select “Internet Protocol Version 4 (TCP/IPv4)” and click on “Properties”.
(7) Select “Use the following IP Address”, set IP address to 192.168.205.101 and subnet mask
to 255.255.255.0, leave rest of the fields blank and press “Save”.
(8) Open the Internet browser and in URL bar type the IP address of Aranet PRO/PRO+:
192.168.205.100
(9) You should now see the Aranet PRO/PRO+ login screen (refer to chapter 2.1.3 Initial Login
and Fast Settings of this manual).
To Next Page
Loading...
