Page 45
3.6.5
Firmware menu
The firmware submenu shows current software version and allows to update it. Semi-automatic update is
implemented since Aranet PRO/PRO+ firmware v. 3.0.1.; manual update is possible too. For semi-automatic
firmware update Aranet PRO/PRO+ must be connected to internet.
When navigating to this menu, Aranet PRO/PRO+ connects to SAF Tehnika server over HTTPS protocol TCP on
port 443 to check for newer firmware version availability. If newer firmware version is released, notification is
shown.
If the base is not connected to internet, the error message is displayed:
To Next Page
Loading...
