Page 64
Aranet PRO/PRO+ base will start its’ paired sensor measurement data upload to the Aranet Cloud
platform. The sensor data upload process depending on sensor data amount and data connection speeds
between Aranet PRO/PRO+ base station and Aranet Cloud system can take up to 20 – 30 minutes. During
this process sensor data will gradually appear in the Aranet Cloud organization.
You can pause uploading sensor data by switch off “Enable cloud upload’. If you wish to unregister Aranet
PRO/PRO+ base from cloud, click UNREGISTER FROM THE COUD.
For more information about Aranet Cloud refer to Aranet Cloud User guide.
For Aranet Cloud usage guidelines please refer to Aranet Cloud forum.
To Next Page
Loading...
