Arcom QAM Snare Navigator Plus User Manual

Name: Arcom QAM Snare Navigator Plus
Brand: Arcom
Rating: 4 (1 reviews)

38 pages

To Next Page

To Previous Page

Auto shutdown counter

When Auto Start/Stop is enabled – when power is

removed from the device while cradled, the unit will begin

a five minute countdown to shut down the device. No

action is required of the user, the message is

informational. To stop the countdown and use the device,

press enter.

Table of Contents2
Overview5
Screen Navigation5
Settings7
General7
- Auto Start/Stop7
- LTE Scan7
- Lte Bpf8
- Standard8
- Auto Reconnect9
- Power down Timer9
Wi-Fi Profile9
- Truck Mode10
- Walk Mode10
QS Server10
- Detector Profile11
Leakage Detector11
- Leakage Detector Analog Mode - Frequency Settings13
- Leakage Detector Pilot/Qam Mode Detector Settings14
- Leakage Detector Pilot/Qam Mode Channel and Frequency Selection15
- Leakage Detector Pilot/Qam Mode Code15
- Leakage Detector Pilot/Qam Mode Level16
- Leakage Detector OFDM Mode Detector Settings16
Leak Alarms17
Calibration17
Display Brightness and Volume Adjustment Hot Key18
Information Hot Key18
Modes Hot Key18
Status Indications19
- Truck or Walk Mode Indicator19
- GPS Status Indicator19
- Wi-Fi Indicator20
- Connection with Server20
Leakage Detector Mode20
Leak Level Display Screen21
- Information Displayed on Leak Level Screen22
Signal View23
- Information Displayed on Signal View Screen23
Map View24
- Updating Leak24
- Close Leak24
- Leak Info25
Analog, Pilot/Qam and OFDM Leakage Detector Mode - Buffering26
Detector Walk Mode26
- Walk Mode Timer27
- Leakage Display Level Indicator27
- Walk Mode Signal View28
Noise Floor Level Indication28
LTE Level Indication28
Auto Shutdown Counter29
Quick, Step by Step Setup Guide30
- 1- Configure Device Using Q-Browser30
- 2- Select Device Settings30
- 3- Configure Leak Alarm Thresholds30
- 4- Adjust Volume and Brightness31
- 5- Check Installation and Wiring31
- 6- Enter Detector Mode and Start Detecting Leaks31
Error Messages and Troubleshooting32
- No GPS Lock32
- No Wi-Fi Connection32
- No Data33
- No Response from Server33
- Headend Signal Processor Offline33
- GPS Antenna Not Connected to Navigator Plus34
- No GPS at Headend Signal Processor34
- Setup Correct QAM Channels34
- Closed Buffer Indication35
- Unable to Connect to Q-Browser35
- GPS Hold Mode Is over35
- Changes Made in Q-Browser Are Not Saved in Detector36
Cradle36
Antennas37
- GPS Antenna37
- RF Roof Antenna37
- RF Walk Mode Antenna37
- Wi-Fi Antenna38
Battery Charging38
Patents38

Questions and Answers:

Need help?

Do you have a question about the Arcom QAM Snare Navigator Plus and is the answer not in the manual?

Arcom QAM Snare Navigator Plus Specifications

General

Brand	Arcom
Model	QAM Snare Navigator Plus
Category	Measuring Instruments
Language	English

Arcom QAM Snare Navigator Plus User Manual

Table of Contents

Questions and Answers:

Arcom QAM Snare Navigator Plus Specifications