Arec LS-200 - Upload the Photo; Download the Photo; Delete the Photo

LS-200 User Manual
48www.arec.com
3.2.1 Upload the photo
3.2.2 Download the photo
3.2.3 Delete the photo
Select the desired photo folder and click to add it in the upload queue. The upload destination is pre-congured by
system administrator. See Administrator\ Upload for more details. The LS-200 arranges the upload sequence automatically
and indicates the upload status/result on the corresponding folders. The following indicators are used:
Select the desired photo folder and click . Select Save if offered the choice to Open or to Save the package. The photo
packages are downloaded to your computer. These are typically saved to the default download location used by your
browser.
To separately download the photo in the folder, click on the folder thumbnail.
Photo packages can be deleted manually to make room for new photos.
Select the folder and click . A confirmation dialog box opens asking you to confirm the deletion. Click Confirm to
permanently remove the photo packages. The list may not update immediately. Refresh the list by reloading this webpage.
Icon Upload Status
The le package are uploaded successfully.
The le upload is failed.
The le is in the upload queue.
The
le
is uploading at this moment.
LS-200