Subject to change · V 2.02.20 · EN
Page 5
www.argo-hytos.com
1. About this documentation
1.1 Applicability of this documentation
This documentation is applicable for the following products:
› OPCom Particle Monitor
› OPCom Particle Monitor Phosphate Ester
› OPCom Particle Monitor without display
This documentation is written for service engineers, technicians, operators and system operators.
This document contains important information for safe and appropriate assembly, transport, activation, operation, usage, servicing,
dismantling and simple troubleshooting.
› Read this document completely and in particular the chapter, “Safety Instructions,” before you work with the product.
1.2 Required and supplementary documentation
Title Number of document Document type
Data sheet 100.50 Data sheet
Quick start 29808300 Quick start
1.3 Presentation of information
So that this document can help you to work quickly and safely with your product, we use standardized safety instructions, symbols,
terms and abbreviations. For better understanding, these are explained in the following sections.
1.3.1 Safety instructions
In this documentation, safety instructions are faced with a sequence of actions which would result in the danger of personal injury or
damage to equipment. The measures described to avoid theses hazards must be observed.
Safety instructions are structured as follows:
SIGNAL WORD
Type and source of danger
Consequences of non-compliance
› Measures for safety and hazard defense
› <List>
› Warning signal: draws attention to the danger
› Signal word: indicates the severity of the danger
› Type and source of danger: specifies the type and source of danger
› Consequences: describes the consequences of non-compliance
› Measures: describes how to deal with the risk
Warning sign, signal word Meaning
DANGER
Indicates a dangerous situation which results in death or serious injury if not avoided.
WARNING
Indicates a dangerous situation which may result in death or serious injury if not avoided.
CAUTION
Indicates a dangerous situation which may result in light to moderate injury if not
avoided.
NOTE Indicates equipment damage: The product or surrounding could be damaged.
Table 1: Required and supplementary documentation
Table 2: Meaning of warning signs
To Next Page
Loading...