Subject to change · V 2.02.20 · EN
Page 58
www.argo-hytos.com
18. Maintenance and repair
CAUTION
Ingress of dirt and fluids causes disorders
Premature wear, malfunctions! Risk of damage! Property damage!
The safe function of the OPCom Particle Monitor is thus no longer guaranteed.
Ensure absolute cleanliness when working at the hydraulic system.
Do not use a high-pressure cleaner.
Damage to the surface by solvents and aggressive detergents!
Aggressive detergents may damage the seals of the OPCom Particle Monitor and let them age faster.
Never use solvents or aggressive detergents.
Do not use a high-pressure cleaner.
Damage to the hydraulic system and the seals
The water pressure of a high-pressure cleaner can damage the hydraulic system and the seals of the OPCom Particle Monitor. The
water displaces the oil from the hydraulic systems and the seals.
Do not use a high-pressure cleaner for cleaning.
Close all openings with suitable protective caps / devices.
Check that all seals and caps of the plug-in connections are secure, so that no humidity can penetrate into the OPCom Particle
Monitor.
Clean the OPCom Particle Monitor only with a dry, lint free tissue.
18.1 Maintenance
When properly used, the OPCom Particle Monitor is maintenance-free.
NOTE
Note that the device needs to be calibrated once a year by the manufacturer.
If this calibration is not carried out, the warranty expires.
18.2 Repair
ARGO-HYTOS offers a comprehensive range of services for repair of the OPCom Particle Monitor.
Spare parts are not offered.
Repair to the OPCom Particle Monitor may only be carried out by the manufacturer or authorized distributors and subsidiaries. There
is no guarantee for self-initiated repairs.
To Next Page
Loading...