Argo-Hytos OPCom - 23. Technical data; 23.1 Technical data table

Subject to change · V 2.02.20 · EN
Page 64
www.argo-hytos.com
23. Technical data
23.1 Technical data
Sensor data Size Unit
Max. operating pressure
dynamic 420 bar
static 600 bar
Permissible flow rate 50...400 ml/min
Operating conditions:
Temperature -20...85 °C
Rel. humidity
(non-condensing)
0...100 % r.H.
Display readable up to 60 °C
Compatible fluids Mineral oils (H, HL, HLP, HLPD, HVLP), synthetic esters (HETG, HEPG, HEES, HEPR),
polyalkylenglycols (PAG), zinc and ash-free oils (ZAF), polyalphaolefins (PAO)
Wetted materials Stainless steel, sapphire, chrome, NBR, minimess coupling: Zinc / nickel
Protection class
1)
IP67
Power supply 9...33 V
Power input max. 0,3 A
Max. power consumption 2 W
Output
Power output
2)
4...20 mA
Accuracy power output
3)
±2 %
Interfaces RS232 / CAN -
Alarm contact Open Collector -
Digital input for start and stop
Power supply 9...33 V
Data memory 3000 data records
Connecting dimensions
Fluid connections G¼ minimess M 16x2 inch
Electrical connection M 12 x 1, 8-pole -
Tightening torque
M12 - connection
0,1 Nm
Measuring range acc. to ISO 4406:17
Cleanliness level (measuring range) 0...24 Ordinal number (OZ)
Cleanliness level
(calibrated range)
10...22 Ordinal number (OZ)
Measuring accuracy
(calibrated range)
±1 Ordinal number (OZ)
Weight ~720 g
Table 44: Technical data
1)
With screwed-on connector
2)
Output IOut is freely configurable (see interfaces and communication commands)
3)
In relation to the analogue current signal (4 ... 20 mA)