Subject to change · V 2.02.20 · EN
Page 63
www.argo-hytos.com
Question Answer
Is it necessary to monitor the measuring equipment? Depending on the user / operator. If the measuring data is used
for further purposes, mostly yes.
Where is the ideal installation point in a system? The installation / measuring point should reflect the overall
condition of the system. Installation after a filter, pump or long
hoses and pipes should be avoided. There must be a constant
oil pressure.
Is the device compatible with diesel fuels? Yes, the device is compatible.
Is the device compatible with phosphate ester / skydrol? The standard version of the OPCom is not skydrol resistant. For
measuring skydrol, the phosphate ester version must be used.
Can CAN and RS232 be used in parallel? No, there is only the possibility of applying one type of commu-
nication. Parallel operation is not possible.
Is the device compatible with rapeseed oil? There is only a slight effect of the medium on the resistance of
internal seals, which, however, can lead to a malfunction of the
part in the long term.
Table 43: FAQ
To Next Page
Loading...
