Subject to change · V 2.02.20 · EN
Page 6
www.argo-hytos.com
1.3.2 Symbols
The following symbols indicate notes which are not safety-relevant but increase the intelligibility of the documentation.
Symbol Meaning
If this information is not observed, the product can not optimally be used or operated
This symbol warns against laser beams.
Singular, independent action step / instruction
1.
2.
Numbered instruction
The numbers indicate that the action steps follow one another
1.3.3 Terms
In this documentation the following terms are used:
Term Meaning
µm(c) Size specification for particles when using ISO-MTD
1.3.4 Abbreviations
Abbreviation Meaning
OL Ordinal number
APC Automatic particle counter
MTD Medium test dust
mm Double-digit indication of minutes
ss Double-digit indication of seconds
Table 3: Meaning of symbols
Table 4: Terms
Table 5: Abbreviations
To Next Page
Loading...
