38
Seat Installation
To install the seat, slide the center tab
on the seat into the seat retainer on the
chassis and press the rear of the seat
down rmly until it locks into place.
NOTE: Ensure the seat is properly tted
into position and locked before operation.
Control Functions
Safety Flag Bracket
To mount a safety ag into the
bracket. Flag poles are optional
equipment available from your ARGO
dealer.
NOTE: Safety ags are required in
some riding areas. Check local
regulations before riding.
Storage Compartment
Your ATV provides three storage compartments; one on each side of the front
fenders and one in the center (in front of the seat).
Be careful not to ood this area when washing your ATV or riding through water, and
never put any electric conduction material in the storage compartments.
To Next Page
Loading...
