79
General Maintenance
4. Turn the shift rod either clockwise or counter-clockwise until the drive select
lever indicator aligns into the “N” (neutral) position on the shift guide.
Tighten the locknuts securely.
Drive
Select
“N”
Hydraulic Brake (Right Hand)
Parking brake
(lever lock)
Hand brake
lever
Be sure to inspect the
hydraulic brake system before
every use. Always maintain
the brakes and the brake
uid level according to the
Maintenance Schedule.
WARNING
Check the brake uid level in the brake uid reservoir sight glass (right and left
sides). If the level in the reservoir is below the lower level or not visible in the sight
glass, add DOT 4 brake uid.
NOTE: If the sight glass appears dark, there is an insucient amount of brake
uid in the reservoir.
Brake Fluid
Sight Window
Be careful not to spill any brake uid when lling the brake uid reservoir. Brake
uid can damage the nish of plastic components. Wipe up any spilled brake uid
immediately.
CAUTION
Brake Fluid
To Next Page
Loading...
