Arjo Citadel - Auxiliary Power Outlet (Optional Feature); Skin IQ Family Power Cable; Skin IQ Installation


Citadel Bed Frame System
Auxiliary Power Outlet (Optional Feature)
'RQRWFRQQHFWDQ\FULWLFDORUOLIHVXVWDLQLQJHTXLSPHQWWRDX[LOLDU\
RXWOHW7KHVHGHYLFHVVKRXOGEHFRQQHFWHGWRKRVSLWDORXWOHWV
'HYLFHVFRQQHFWHGWRWKLVRXWOHWVKDOOQRWH[FHHG
• 115 VAC / 7A
• 230 VAC / 4A
This outlet does not remain powered when the bed is on battery
EDFNXS
Auxiliary power outlet is provided as a convenience for powering devices intended to
be placed at or near the foot end of the bed.
Skin IQ Family Power Cable
The cable should only be used to power the Skin IQ Family of
SURGXFWV
Skin IQ Power Cable is provided as a convenience for powering Skin IQ. This feature
remains powered for four hours when the bed is on battery backup. A 12 VDC power
cable is located at the foot end of the bed which provides a connection point for the
Skin IQ of products.
Skin IQ Installation
Refer to Skin IQ Instructions for Use for detailed installation
instructions.
1. Stretch the Skin IQ coverlet over existing surface and use straps to secure to
existing mattress.
2. When using the Skin IQ on the Citadel mattress, the mattress comes already
equipped with straps located mid way under the mattress exclusively for
attaching the tie-down straps from the Skin IQ coverlet.
3. Use the 12 VDC power cable, centered at the foot end of the bed to plug in
the Skin IQ. Cable has a tag indicating it is for Skin IQ use.
)LJXUH$X[LOLDU\SRZHURXWOHWDQGSkin IQ Family power cable
Skin IQ
connection
located behind
foot board
weldment
Auxiliary
power outlet
located on the
under side
of foot board
weldment