This product complies with the CE marking requirements.
1.1.1
Regulatory Compliance
The device meets the requirements of the applicable sections of the following standards:
EMC
■
47 CFR 15, Sub Part B, Class A
■
CISPR
/
EN 55022, Radiated and Conducted Emission for ITE
■
CISPR
/
EN 55024, Immunity for ITE
■
CISPR / EN 55032, Electromagnetic compatibility of multimedia equipment
■
EN 50083-2, Electromagnetic compatibility for cable networks equipment
■
VCCI V-3
/
2015.04
■
2014/30/EU Electromagnetic Compatibility Directive (EMC)
Safety
■
IEC 60950-1:2005+A1+A2 - ITE - Safety - General requirements
■
EN 60950-1:2006+A11+A1+A12+A2 - ITE - Safety - General requirements
■
IEC 60950-22:2005 - ITE - Safety - Equipment to be installed outdoors
■
EN 60950-22: 2006+A11 - ITE - Safety - Equipment to be installed outdoors
■
IEC 60825-1:2014 - Safety of laser products - Equipment classification and requirements
■
EN 60825-1:2014 - Safety of laser products - Equipment classification and requirements
■
IEC 60825-2:2004+A1+A2 - Safety of laser products - Safety of OFCS
■
EN 60825-2:2004+A1+A2 - Safety of laser products - Safety of OFCS
■
UL 60950-1-07+A1+A2- ITE - Safety - General requirements
■
UL 60950-22:2007 R12.11 - ITE - Safety - Equipment to be installed outdoors
■
CAN/CSA-C22.2 No. 60950-1-07+Amd 1+Amd 2 - ITE - Safety - General requirements
■
CAN/CSA-C22.2 No.60950-22-07+GI1 (R2012) - ITE - Safety - Equipment to be installed
outdoors
■
Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice
No. 50, dated June 24, 2007
■
2014/30/EU Low Voltage Directive (LVD)
To Next Page
Loading...
