15Hz < f <30Hz: add ±(2% of reading +
0.2% of range) to base accuracy
30Hz < f < 100KHz : add ±(2% of
reading + 0.2% of range) to base
accuracy
100KHz < f < 1MHZ : add ±(2% of
reading + 0.5% of range) to base
accuracy
0.0uA ~ 600uA, frequency DC –
100KHz
15Hz < f < 100KHz : add ±(2% of
reading + 0.2% of range) to base
accuracy
Touch Current Display (DC Only)
DC : ±(2% of reading + 3counts)
DC : ±(2% of reading + 3counts)
DC : ±(2% of reading +3counts)
DC : ±(2% of reading + 3counts)
DC : ±(2% of reading + 3counts)
DC : ±5% of reading (0.01mA -
10.00mA )