36
Use the up or down arrow keys to select the date format.
Once a parameter is edited, it is necessary to complete the edit either by pressing the
ENTER key to accept the new value or the EXIT key to escape from the edit and
return to the original value.
Time Format
From the Time and Date Setting screen, press the “Time Format” soft key. As the soft
key is pressed, the time format will toggle between 12 hour and 24 hour modes.
4.2.3. Calibration Alert
Calibration Alert is a feature that will allow the instrument to give an advanced alert
that the calibration for the instrument is coming due. From the System Setup screen,
press the “Calibration Alert” soft key. The Calibration Alert Setting screen will now be
displayed. From the Calibration Alert Setting screen, three different parameters may
be accessed: Calibration Due, Alert Date, Calibration Alert. The Calibration Alert
Setting screen also displays the date of the last performed calibration. The Calibration
Alert Setting screen will appear as follows:
To Next Page
Loading...
Need help?
General
