35
Set Day
From the Time and Date Setting screen, press the “Set Day” soft key. As the soft key
is pressed, the “Set Day” pop up screen will appear as follows:
Use the up or down arrow keys to select the day of the week.
Once a parameter is edited, it is necessary to complete the edit either by pressing the
ENTER key to accept the new value or the EXIT key to escape from the edit and
return to the original value.
Date Format
From the Time and Date Setting screen, press the “Date Format” soft key. As the soft
key is pressed, the “Date Format” pop up screen will appear as follows:
To Next Page
Loading...
