52
Use the up or down arrow keys to select the preferred home screen setting for the
unit. The home screen setting options are Menu, Perform Tests and My Menu.
Configure OMNIA to go directly to the Perform Test screen
1. Set OMNIA Animation to CONTINUE or SKIP.
2. Set the Home Screen selection to Perform Tests. Now when the instrument is
powered on it will go directly to the Perform Test screen.
4.3. Setup Tests Menu
From the Main Menu screen press the “Setup Tests” soft key. The Setup Tests
screen will now be displayed. From the Setup Tests screen, six different software
controls may be accessed: Add, Edit, Delete, Prompt, File, and Fail Stop. The Setup
Tests screen will appear as follows: