51
up or CONTINUE through to the next screen after the Animation screen is displayed
for four seconds or SKIP the Animation screen completely. The option to PAUSE,
CONTINUE or SKIP may be selected by pressing the “Animation” soft key. When
PAUSE is selected, the words “Press any key to continue” will appear at the bottom of
the OMNIA Animation screen.
From the Power-On Screens, press the “Animation” soft key. As the soft key is
pressed, the “Animation” pop up screen will appear as follows:
Use the up or down arrow keys to select the preferred animation setting for the unit.
The animation setting options are Continue, Pause and Skip.
Once a parameter is edited, it is necessary to complete the edit either by pressing the
ENTER key to accept the new value or the EXIT key to escape from the edit and
return to the original value.
Home Screen
The Home Screen parameter allows you to select the first screen to appear on the
OMNIA after the Animation screen. If the Animation screen is set to Skip, the selected
Home Screen parameter will be the first screen to appear upon power up.
From the Power-On Screens, press the “Home Screen” soft key. As the soft key is
pressed, the “Home Screen” pop up screen will appear as follows:
To Next Page
Loading...
Need help?
General
