Associated Research OMNIA II 8207 User Manual

197
If the instrument fails the Verification (test pass, indicating the fail detectors are not
working properly) the TEST button will illuminate and the following pop-up message
will appear over the metering screen:
9.1.4. DC Hipot Verification
From the FailCHEK screen, press the “DC Hipot” soft key. A pop-up message will
now be displayed. The message will appear as follows:

Associated Research OMNIA II 8207 Specifications

General

Brand	Associated Research
Model	OMNIA II 8207
Category	Measuring Instruments
Language	English