95
5.2. Perform Tests Menu
From the Main Menu screen, press the soft key “Perform Tests”. The Perform Tests
Menu will now be displayed. From the Perform Tests screen, four different software
controls may be accessed: Single Step (ON/OFF), Fail Stop (ON/OFF), Load File,
Results. The arrow keys may also be used to scroll the highlighted area to a specific
test or page of tests if the file is larger than 10 steps. The Perform Tests screen will
appear as follows:
The Perform Tests screen is the main operational screen of instrument. From this
screen individual steps are monitored while the test is being performed. At the end of
a sequence of tests, all of the step results may be recalled via the “Results” soft key
on this screen. This screen may also be used to debug test files with the use of the
single step and fail stop functions.
5.2.1. Load File
From the Perform Tests screen, press the “Load File” soft key. The Load File screen
will now be displayed. The Load File screen will appear as follows:
To Next Page
Loading...
Need help?
General
