43
From the User Setup screen, you can view the list of users currently setup and the
associated security level. The OMNIA will have a default User ID named ADMIN with
Full System Access security level. This User ID cannot be deleted.
Add User
From the User Setup screen, press the Add User soft key. As the soft key is pressed,
you will be taken to the Add User screen.
From this screen, a new user can be added by entering an alpha/numeric User ID,
Password, Password Confirmation and desired security level.
User ID
To enter a User ID, use the up and down arrow keys to select the User ID parameter.
Use the alpha/numeric keypad to add a User ID. The User ID is limited to 8
characters.
Once the User ID parameter is edited, it is necessary to complete the edit either by
pressing the ENTER key to accept the new User ID or the EXIT key to escape from
the edit and delete the User ID.
Password
Each User ID must have a password associated with it. To enter a Password, use the
up and down arrow keys to select the Password parameter. Use the alpha/numeric
keypad to enter a password. The password is limited to 8 characters.
Once the password is entered, it is necessary to complete the edit either by pressing
the ENTER key to accept the new password or the EXIT key to escape from the edit
and delete the password.
To Next Page
Loading...
Need help?
General
