Astoria 2GR - Guidelines for Reading the Manual; Introduction; Method for Updating the Instruction Manual; Recipients

USER manual 37 of 216
English
1. INTRODUCTION
Please read this Manual in its entirety before using the appli-
ance, in order to optimise machine performance and operate
it safely.
The espresso coffee machine you have purchased has been
designed and manufactured with innovative methods and
technologies which ensure long lasting quality and reliability.
This Manual is the guide that will enable you to learn about
thebenetsofchoosingourbrand.Youwillndinformation
on how to get the best out of your appliance, how to keep it
runningefcientlyandwhatyoushoulddoifproblemsoccur.
Before using the machine, carefully read and follow
the instructions contained in this publication. Keep
this manual and all attached publications in an ac-
cessible and secure place. This document assumes that the ma-
chine has been installed in a location where the current work
safety and hygiene standards are observed.
The Manufacturer reserves the right to make any improve-
ments and/or modications to the product. We guarantee
thatthisManualreectsthetechnicalstateoftheappliance
at the time it was released to the market.
We take this opportunity to invite customers to make any pro-
posals to improve the product or its Manual.
1.1 Guidelines for reading the Manual
This Manual is divided into separate chapters. The chapter
order is linked to the temporal logic of the life of the machine.
Terms, abbreviations and pictograms are used to facilitate
the immediate understanding of the text.
This Manual consists of a cover, index and series of chapters.
Each chapter is sequentially numbered. The page number is
shown in the footer.
Therstpagedisplaysthemachineidenticationdataand
the last page displays the date and revision of the Instruction
Manual.
Abbreviations
Sec. = Section
Chap. = Chapter
Para. = Paragraph
P. = Page
Fig. = Figure
Tab. = Table
Units of measurement
The units of measurement are those provided by the Interna-
tional System (SI).
1.2 Storing the Manual
The Instruction Manual must be stored in a safe place and
accompany the machine in all ownership transfers.
The manual should be stored, handled with care with clean
hands and not placed on dirty surfaces. Do not remove, tear
or arbitrarily modify any of its parts.
The manual must be stored away from moisture and heat,
and in close proximity to the machine it refers to.
On the User's request, the Manufacturer can provideaddi-
tional copies of the Instruction Manual.
1.3 Method for updating the Instruction
Manual
The Manufacturer reserves the right to modify and make
improvements to the machine without providing notice or
updating the Manual that has already been supplied to the
User.
Should the Manual become illegible or otherwise
hard to read, the User must request a new copy
from the Manufacturer before carrying out any op-
erations on the machine.
It is absolutely forbidden to remove or rewrite parts of the
Manual.
Users are responsible for complying with the instructions
contained in this Manual.
Should any incident occur as a result of these recommenda-
tions being used incorrectly, the Manufacturer declines any
liability.
This manual is also available on the manufacturer’s website
via a restricted-access page.
1.4 Recipients
This Manual is intended for the User.
Machine recipient qualications
The machine is intended for a professional non-generalised
use, so it must be used by trained people, and in particular
those who:
• Are aged 18 and over.
• Are physically and mentally capable of using the machine.
• Are able to understand and interpret the Instruction Man-
ual and safety requirements.
• Know the safety procedures and how they are imple-
mented.
• Are able to use the machine.
• Haveunderstoodtheproceduresofuseasdenedbythe
machine'sManufacturer.