USER manual 53 of 216
1.0 BAR 115°C P
09:16 13-01-20 5
LANGUAGE
ENGLISH
COFFEE TOTALS
NNNNN
LITRE COUNTER
L = NNNNN
AUTOMATIC STEAM WAND
75 °C
CUP WARMER
80 °C
HEATING UNIT PRESSURE
1.0 BAR CURR = 7
WORKING DAYS
1234567
AUTO ON/OFF
ON 08:00
CLOCK SETUP
09:16 18-10-12 1
(MODE) x 3 secs.
(MODE).
(MODE).
(MODE)
(MODE)
(MODE)
(MODE)
(MODE)
(MODE)
6.11.2 Programming the Clock
This menu is used to change the time, date and day of the
week:
• Enter the programming mode and scroll through the menu
until the following is shown on the display:
CLOCK SETUP
09:16 18-10-12 1
• Changetheashingparameterviathe(+) and (-) buttons.
• Press the (ENTER) button to move on to the next param-
eter.
• Toconrmtheenteredparametersandmoveontothe
next programming function, press the (MODE) button.
6.11.3 Programming the machine’s
Switch-On and Switch-Off function
This menu is used to programme the machine’s automatic
switch-on and switch-off procedures.
Toenablethisfunction,theswitch-ontimemustrstbeset,
before setting the switch-off time.
• Enter the programming mode and scroll through the menu
until the following is shown on the display:
AUTO ON/OFF
ON 08:00
• Press the (ENTER) button to enter the menu.
• Set the machine’s switch-on hour via the (+) and (-) but-
tons and then press (ENTER).
• Set the minutes of the machine’s switch-on time via the
(+) and (-) buttons and then press (ENTER).
• The machine start-up settings are saved; you can then
proceed to set the switch-off time when the following ap-
pears on the display:
AUTO ON/OFF
OFF 23:00
• Set the machine’s switch-off hour via the (+) and (-) but-
tons and then press (ENTER).
• Set the minutes of the machine’s switch-off time via the
(+) and (-) buttons and then press (ENTER).
• Toconrmtheenteredparametersandmoveontothe
next programming function, press the (MODE) button.
To disable the "AUTO ON/OFF" function, set the
time to 00:00.