Chapter 3 OPERATION
59
3.4.11 Compare mode
3.4.11.1 Outline
〈〈 Outline 〉〉
The compare mode is established by pressing P1, P2, P3 or P4 in the freeze status. This mode is useful for
comparing the current data against the freeze data in different ways.
〈〈 Operation method 〉〉
In the freeze mode, the F1 to F5 functions change as shown below.
z P1: Establishes the compare mode 1.
z P2: Establishes the compare mode 2.
z P3: Establishes the compare mode 3.
z P4: Establishes the compare mode 4.
z P5: Returns to the normal mode.
To Next Page