Asus RS540-E9-RS36-E - Mounting the Server to the Rack

Chapter 3: Installation Options
3-4
Align the server rails with the rack rails, then push the server all the way to the depth of the
rack.
To mount the server into the rack:
3.1.2 Mounting the server to the rack
• Ensurethattherackrailcabinetandtherackpostsarestableandstandingrmlyona
level surface.
• We strongly recommend that at least two able-bodied persons perform the steps
described in this guide.
• We recommend the use an appropriate lifting tool or device, if necessary.
If you installed the rail screw and rail washer in step 6 of section
3.1.1 Attaching the rack
rails
,makesuretoremovetherailscrewandtherailwasherrstbeforeproceedingtothe
next step.