AT&T 1070 - Page 27

21
Feature menu
Feature Function Options
COVM RESET
(1080 and 1070
only)
Clear Central Office Voice Mail
(COVM) indicator when the
telephone indicates there is voice
mail when you have none, or you
have accessed your voice mail from
a remote location (while away from
home or office).
N/A
AREA CODES
(1080 and 1070
only)
Set one home area code and up
to five local area codes for use
with caller ID features.
3 digits, empty
LINE GROUP Assign the telephone to a line
group. If all the extensions in your
system have the same telephone
lines connected in the same order,
this feature does not apply.
PRIVATE LINE,
LINE 04 – LINE
15
RESET ALL This feature will return all feature
settings for this phone to their
factory settings. Voice messages
on 1080 extensions will not be
erased.
N/A
AUTO ATT SETUP
(1080 only)
Designate a desired phone as an Auto Attendant (AA)
and control the timing of the AA features.
EVERY 1080=AA Make all 1080 telephones auto
attendants.
N/A
NO 1080=AA No 1080 telephones will be auto
attendants.
N/A
PER 1080=AA Assign a desired 1080 telephone
as an auto attendant.
YES, NO
AUTO ATT DELAY Specify how long an auto attendant
waits before picking up incoming
calls.
6 – 30 SEC
DAY/NIGHT TIMES Specify times to be considered
day or night for auto attendant
features.
Default:
Day 9:00AM,
Night 6:00PM
RESET AUTO ATT Return auto attendant setup for
all telephones to default.
N/A