AT&T 1070 - Page 67

61
DTAD SETUP
ON
MESSAGE ALERT
DTAD setup (1080 only)
MESSAGE ALERT
Use this feature to turn the audible message alert
on or off.
If the message alert tone is on, the telephone
beeps every 30 seconds when there are new
private or central messages.
1. Press
[ENTER].
2. Press
[ ] or [ ] until you see DTAD SETUP.
Press [ENTER].
3. Press
[ ] or [ ] until you see MESSAGE ALERT.
4. Press
[ ] or [ ] to choose ON or OFF.
5.
To move to the next feature, press [ ].
-OR-
To exit setup,
press and hold [ENTER].